Jump to content

Recommended Posts

Thats easy enough :)

Just dl the server and client, run the server on one machine and join with the client on that machine.

Then just use the client on other comps and join to the server's ip.

Alternativly you could connect the admins as well, they work great for larger LAN parties btw :D

Link to comment

Server is the host machine. Client is the machine that connects to it.

When you say they both have the same IP, you must be talking about the external IP. They also have internal IPs within the LAN.

To find out the internal IP of each machine, go to Start > Run and type cmd into the box and press enter. Now type ipconfig and press enter. You will then see some details about your network. The local IP address is listed under the IP Address field.

Decide which machine is going to be the host and run the MTA server program on that machine. Note its IP address (you might want to write it down).

Now run the MTA client (the icon on your desktop) on the client PC and type the other machine's IP address into the box. If you want to play on the host machine as well, run the MTA client on the host machine and type localhost instead of an IP.

Link to comment
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...