Jump to content

Duda con tabla db


Narutimmy

Recommended Posts

Hola tengo un problemin esto es de un sistema de guardado de autos junto a unas data que se guardan en ellos, el problema es qe no las guardaba y aparte tomaba cordenadas nuevas asi que lo edite pero no estoy seguro que funcione.

Antes:

function backupAllVehZ() 
    dbExec(db, "DROP TABLE vehicles") 
    kk = dbQuery(db, "CREATE TABLE IF NOT EXISTS vehicles (model, x, y, z, rotx, roty, rotz, slots, fuel, tires, engines, parts, id)") 
    dbFree ( kk )  
    local vehicles = getElementsByType("vehicle") 
    id = 0 
    for i,v in ipairs(vehicles) do 
    local CCOL = getElementData (v,"parent") 
     if CCOL  then 
        local model = getElementModel(v) 
        local x, y, z = getElementPosition(v) 
        local rotx, roty, rotz = getElementRotation(v) 
        local slots = getElementData(getElementData(v, "parent"), "MAX_Slots") or 20 
        local fuel = getElementData(getElementData(v, "parent"), "fuel") 
        local tires = getElementData(getElementData(v, "parent"), "Tire_inVehicle") 
        local engines = getElementData(getElementData(v, "parent"), "Engine_inVehicle") or 0 
        local parts = getElementData(getElementData(v, "parent"), "Parts_inVehicle") or 0 
        id = id + 1 
        sda = dbQuery(db, "INSERT INTO vehicles (model, x, y, z, rotx, roty, rotz, slots, fuel, tires, engines, parts, id) VALUES(?,?,?,?,?,?,?,?,?,?,?,?,?)", model, x, y, z, rotx, roty, rotz, slots, fuel, tires, engines, parts, id) 
        dbFree ( sda )  
      end 
    end 
    noteAdmins("Vehicle backup done! ["..#vehicles.."]") 
end 
  
function createCars(model, x, y, z, rotx, roty, rotz, slots, fuel, tires, engines, parts, id) 
    veh = createVehicle(model, x, y, z, rotx, roty, rotz) 
    vehCol = createColSphere(x, y, z, 2) 
    attachElements(vehCol, veh, 0, 0, 0) 
    setElementData(vehCol, "parent", veh) 
    setElementData(veh, "parent", vehCol) 
    setElementData(vehCol, "vehicle", true) 
    setElementData(vehCol, "MAX_Slots", tonumber(slots)) 
    local tires, engine, parts = getVehicleAddonInfos(getElementModel(veh)) 
    setElementData(vehCol, "Tire_inVehicle", tonumber(tires)) 
    setElementData(vehCol, "Engine_inVehicle", tonumber(engines)) 
    setElementData(vehCol, "Parts_inVehicle", tonumber(parts)) 
    setElementData(vehCol, "spawn", {model, x, y, z}) 
    setElementData(vehCol, "fuel", tonumber(fuel)) 
end 

Despues

function backupAllVehZ() 
    dbExec(db, "DROP TABLE vehicles") 
    kk = dbQuery(db, "CREATE TABLE IF NOT EXISTS vehicles (model, x, y, z, rotx, roty, rotz, slots, fuel, tires, engines, parts, id)") 
    dbFree ( kk )  
    local vehicles = getElementsByType("vehicle") 
    id = 0 
    for i,v in ipairs(vehicles) do 
    local CCOL = getElementData (v,"parent") 
    local VIP = getElementData (v,"VIP") 
     if CCOL  then 
      if not VIP then 
        ---local model = getElementModel(v) 
        local model, x, y, z = getElementData(v, "spawn")[1], getElementData(v, "spawn")[2], getElementData(v, "spawn")[3], getElementData(v, "spawn")[4] 
        local rotx, roty, rotz = getElementRotation(v) 
        local slots = getElementData(getElementData(v, "parent"), "MAX_Slots") or 20 
        local fuel = getElementData(getElementData(v, "parent"), "fuel") 
        local tires = getElementData(getElementData(v, "parent"), "Tire_inVehicle") or 0 
        local engines = getElementData(getElementData(v, "parent"), "Engine_inVehicle") or 0 
        local parts = getElementData(getElementData(v, "parent"), "Parts_inVehicle") or 0 
         
        id = id + 1 
        sda = dbQuery(db, "INSERT INTO vehicles (model, x, y, z, rotx, roty, rotz, slots, fuel, tires, engines, parts, id) VALUES(?,?,?,?,?,?,?,?,?,?,?,?,?)", model, x, y, z, rotx, roty, rotz, slots, fuel, tires, engines, parts, id) 
        dbFree ( sda )  
      end 
      end 
    end 
    noteAdmins("Vehicle backup done! ["..#vehicles.."]") 
end 
  
function createCars(model, x, y, z, rotx, roty, rotz, slots, fuel, tires, engines, parts, id) 
    veh = createVehicle(model, x, y, z, rotx, roty, rotz) 
    vehCol = createColSphere(x, y, z, 2) 
    attachElements(vehCol, veh, 0, 0, 0) 
    setElementData(vehCol, "parent", veh) 
    setElementData(veh, "parent", vehCol) 
    setElementData(vehCol, "vehicle", true) 
    setElementData(vehCol, "MAX_Slots", tonumber(slots)) 
    local tires, engine, parts = getVehicleAddonInfos(getElementModel(veh)) 
    setElementData(vehCol, "Tire_inVehicle", tonumber(tires)) 
    setElementData(vehCol, "Engine_inVehicle", tonumber(engines)) 
    setElementData(vehCol, "Parts_inVehicle", tonumber(parts)) 
    setElementData(vehCol, "spawn", {model, x, y, z}) 
    setElementData(vehCol, "fuel", tonumber(fuel)) 
end 

En pocas palabras lo que quiero es que cuando guarde se guarde lo del a data "spawn" y que al spawnearlo de vuelta se le sete esa data pero no con la posision donde se guardo sino la original, nose si me explico.

ejemplo:

Su Spawn es en el Punto A, el auto de mueve de lugar al Punto B, yo guardo la ubicacion para reiniciar el sv, entonces ahora el auto al iniciaro Spawnea en el punto B todo bien pero cuando explota se toma la data "spawn" entonces ahora cada que explota y reaparece spawnea en el punto B siempre.

Lo que yo quiero es que al guardar se guarde el punto A y B, y que cuando yo lo restaure aparesca en B, pero al Explotar y reaparecer aparesca en A.

EDIT; Bueno mientras editaba me lo entendi mejor y croe seria asi no?

  
function backupAllVehZ() 
    dbExec(db, "DROP TABLE vehicles") 
    kk = dbQuery(db, "CREATE TABLE IF NOT EXISTS vehicles (model, x, y, z, rotx, roty, rotz, slots, fuel, tires, engines, parts, id)") 
    dbFree ( kk )  
    local vehicles = getElementsByType("vehicle") 
    id = 0 
    for i,v in ipairs(vehicles) do 
    local CCOL = getElementData (v,"parent") 
    local VIP = getElementData (v,"VIP") 
     if CCOL  then 
      if not VIP then 
        ---local model = getElementModel(v) 
        local model, x, y, z = getElementData(v, "spawn")[1], getElementData(v, "spawn")[2], getElementData(v, "spawn")[3], getElementData(v, "spawn")[4] 
        local x2,y2,z2 = getElementPosition(v) 
        local rotx, roty, rotz = getElementRotation(v) 
        local slots = getElementData(getElementData(v, "parent"), "MAX_Slots") or 20 
        local fuel = getElementData(getElementData(v, "parent"), "fuel") 
        local tires = getElementData(getElementData(v, "parent"), "Tire_inVehicle") or 0 
        local engines = getElementData(getElementData(v, "parent"), "Engine_inVehicle") or 0 
        local parts = getElementData(getElementData(v, "parent"), "Parts_inVehicle") or 0 
         
        id = id + 1 
        sda = dbQuery(db, "INSERT INTO vehicles (model, x, y, z,x2,y2,z2, rotx, roty, rotz, slots, fuel, tires, engines, parts, id) VALUES(?,?,?,?,?,?,?,?,?,?,?,?,?)", model, x, y, z, rotx, roty, rotz, slots, fuel, tires, engines, parts, id) 
        dbFree ( sda )  
      end 
      end 
    end 
    noteAdmins("Vehicle backup done! ["..#vehicles.."]") 
end 
  
function createCars(model, x, y, z,x2,y2,z2 rotx, roty, rotz, slots, fuel, tires, engines, parts, id) 
    veh = createVehicle(model, x2, y2, z2, rotx, roty, rotz) 
    vehCol = createColSphere(x2, y2, z2, 2) 
    attachElements(vehCol, veh, 0, 0, 0) 
    setElementData(vehCol, "parent", veh) 
    setElementData(veh, "parent", vehCol) 
    setElementData(vehCol, "vehicle", true) 
    setElementData(vehCol, "MAX_Slots", tonumber(slots)) 
    local tires, engine, parts = getVehicleAddonInfos(getElementModel(veh)) 
    setElementData(vehCol, "Tire_inVehicle", tonumber(tires)) 
    setElementData(vehCol, "Engine_inVehicle", tonumber(engines)) 
    setElementData(vehCol, "Parts_inVehicle", tonumber(parts)) 
    setElementData(vehCol, "spawn", {model, x, y, z}) 
    setElementData(vehCol, "fuel", tonumber(fuel)) 
end 

EDIT me tira bolean en el : local model, x, y, z = getElementData(v, "spawn")[1], getElementData(v, "spawn")[2], getElementData(v, "spawn")[3], getElementData(v, "spawn")[4]

Link to comment

No sé si se pueden guardar tablas con la función setElementData, pero puedes transformarlo al formato JSON, así:

function backupAllVehZ() 
    dbExec(db, "DROP TABLE vehicles") 
    kk = dbQuery(db, "CREATE TABLE IF NOT EXISTS vehicles (model, x, y, z, rotx, roty, rotz, slots, fuel, tires, engines, parts, id)") 
    dbFree ( kk ) 
    local vehicles = getElementsByType("vehicle") 
    id = 0 
    for i,v in ipairs(vehicles) do 
    local CCOL = getElementData (v,"parent") 
    local VIP = getElementData (v,"VIP") 
     if CCOL  then 
      if not VIP then 
        ---local model = getElementModel(v) 
        --local model, x, y, z = getElementData(v, "spawn")[1], getElementData(v, "spawn")[2], getElementData(v, "spawn")[3], getElementData(v, "spawn")[4] 
        local model, x, y, z = unpack ( fromJSON ( getElementData(v, "spawn") ) ) 
        local x2,y2,z2 = getElementPosition(v) 
        local rotx, roty, rotz = getElementRotation(v) 
        local slots = getElementData(getElementData(v, "parent"), "MAX_Slots") or 20 
        local fuel = getElementData(getElementData(v, "parent"), "fuel") 
        local tires = getElementData(getElementData(v, "parent"), "Tire_inVehicle") or 0 
        local engines = getElementData(getElementData(v, "parent"), "Engine_inVehicle") or 0 
        local parts = getElementData(getElementData(v, "parent"), "Parts_inVehicle") or 0 
        
        id = id + 1 
        sda = dbQuery(db, "INSERT INTO vehicles (model, x, y, z,x2,y2,z2, rotx, roty, rotz, slots, fuel, tires, engines, parts, id) VALUES(?,?,?,?,?,?,?,?,?,?,?,?,?)", model, x, y, z, rotx, roty, rotz, slots, fuel, tires, engines, parts, id) 
        dbFree ( sda ) 
      end 
      end 
    end 
    noteAdmins("Vehicle backup done! ["..#vehicles.."]") 
end 
  
function createCars(model, x, y, z,x2,y2,z2 rotx, roty, rotz, slots, fuel, tires, engines, parts, id) 
    veh = createVehicle(model, x2, y2, z2, rotx, roty, rotz) 
    vehCol = createColSphere(x2, y2, z2, 2) 
    attachElements(vehCol, veh, 0, 0, 0) 
    setElementData(vehCol, "parent", veh) 
    setElementData(veh, "parent", vehCol) 
    setElementData(vehCol, "vehicle", true) 
    setElementData(vehCol, "MAX_Slots", tonumber(slots)) 
    local tires, engine, parts = getVehicleAddonInfos(getElementModel(veh)) 
    setElementData(vehCol, "Tire_inVehicle", tonumber(tires)) 
    setElementData(vehCol, "Engine_inVehicle", tonumber(engines)) 
    setElementData(vehCol, "Parts_inVehicle", tonumber(parts)) 
    setElementData(vehCol, "spawn", toJSON ( { model, x, y, z } ) ) 
    setElementData(vehCol, "fuel", tonumber(fuel)) 
end 

(No lo he probado)

Link to comment
  • 2 weeks later...
No sé si se pueden guardar tablas con la función setElementData, pero puedes transformarlo al formato JSON, así:
function backupAllVehZ() 
    dbExec(db, "DROP TABLE vehicles") 
    kk = dbQuery(db, "CREATE TABLE IF NOT EXISTS vehicles (model, x, y, z, rotx, roty, rotz, slots, fuel, tires, engines, parts, id)") 
    dbFree ( kk ) 
    local vehicles = getElementsByType("vehicle") 
    id = 0 
    for i,v in ipairs(vehicles) do 
    local CCOL = getElementData (v,"parent") 
    local VIP = getElementData (v,"VIP") 
     if CCOL  then 
      if not VIP then 
        ---local model = getElementModel(v) 
        --local model, x, y, z = getElementData(v, "spawn")[1], getElementData(v, "spawn")[2], getElementData(v, "spawn")[3], getElementData(v, "spawn")[4] 
        local model, x, y, z = unpack ( fromJSON ( getElementData(v, "spawn") ) ) 
        local x2,y2,z2 = getElementPosition(v) 
        local rotx, roty, rotz = getElementRotation(v) 
        local slots = getElementData(getElementData(v, "parent"), "MAX_Slots") or 20 
        local fuel = getElementData(getElementData(v, "parent"), "fuel") 
        local tires = getElementData(getElementData(v, "parent"), "Tire_inVehicle") or 0 
        local engines = getElementData(getElementData(v, "parent"), "Engine_inVehicle") or 0 
        local parts = getElementData(getElementData(v, "parent"), "Parts_inVehicle") or 0 
        
        id = id + 1 
        sda = dbQuery(db, "INSERT INTO vehicles (model, x, y, z,x2,y2,z2, rotx, roty, rotz, slots, fuel, tires, engines, parts, id) VALUES(?,?,?,?,?,?,?,?,?,?,?,?,?)", model, x, y, z, rotx, roty, rotz, slots, fuel, tires, engines, parts, id) 
        dbFree ( sda ) 
      end 
      end 
    end 
    noteAdmins("Vehicle backup done! ["..#vehicles.."]") 
end 
  
function createCars(model, x, y, z,x2,y2,z2 rotx, roty, rotz, slots, fuel, tires, engines, parts, id) 
    veh = createVehicle(model, x2, y2, z2, rotx, roty, rotz) 
    vehCol = createColSphere(x2, y2, z2, 2) 
    attachElements(vehCol, veh, 0, 0, 0) 
    setElementData(vehCol, "parent", veh) 
    setElementData(veh, "parent", vehCol) 
    setElementData(vehCol, "vehicle", true) 
    setElementData(vehCol, "MAX_Slots", tonumber(slots)) 
    local tires, engine, parts = getVehicleAddonInfos(getElementModel(veh)) 
    setElementData(vehCol, "Tire_inVehicle", tonumber(tires)) 
    setElementData(vehCol, "Engine_inVehicle", tonumber(engines)) 
    setElementData(vehCol, "Parts_inVehicle", tonumber(parts)) 
    setElementData(vehCol, "spawn", toJSON ( { model, x, y, z } ) ) 
    setElementData(vehCol, "fuel", tonumber(fuel)) 
end 

(No lo he probado)

no lo habia podido probar.. no funciona :&%

GR0ObaZ.png

Link to comment
Fijate si "getElementData(v, "spawn")" devuelve algo.

Te Explico cuando un auto se crea se usa esto:

for i, veh in ipairs(pickupSpawns) do 
    local x, y, z = veh[1], veh[2], veh[3] 
    veh = createVehicle(422, x, y, z) 
    vehCol = createColSphere(x, y, z, 2) 
    attachElements(vehCol, veh, 0, 0, 0) 
    setElementData(vehCol, "parent", veh) 
    setElementData(veh, "parent", vehCol) 
    setElementData(vehCol, "vehicle", true) 
    setElementData(vehCol, "MAX_Slots", 20) 
    local tires, engine, parts = getVehicleAddonInfos(getElementModel(veh)) 
    setElementData(vehCol, "Tire_inVehicle", math.random(0, tires)) 
    setElementData(vehCol, "Engine_inVehicle", math.random(0, engine)) 
    setElementData(vehCol, "Parts_inVehicle", math.random(0, parts)) 
    setElementData(vehCol, "spawn", { 
      422, 
      x, 
      y, 
      z 
    }) 
    setElementData(vehCol, "fuel", 10) 
  end 

y cuando explota se respawnea usando esos datos:

function notifyAboutExplosion() 
local col = getElementData(source, "parent") 
if col then 
   
  local x1, y1, z1 = getElementPosition(source) 
  id, x, y, z = getElementData(col, "spawn")[1], getElementData(col, "spawn")[2], getElementData(col, "spawn")[3], getElementData(col, "spawn")[4] 
  local spawnnormal = getElementData(col, "spawn") 
   
  if spawnnormal then 
   
  source = source 
  setTimer(respawnDayZVehicle, 600000, 1, id, x, y, z, source, col, getElementData(col, "MAX_Slots")) 
  ---setTimer(destroyElement,1800000,1,source) 
  setElementData(col, "deadVehicle", true) 
  setElementData(source, "isExploded", true) 
  createExplosion(x1 + 4, y1 + 1, z1, 4) 
  createExplosion(x1 + 2, y1 - 4, z1, 4) 
  createExplosion(x1 - 1, y1 + 5, z1, 4) 
  createExplosion(x1 - 4, y1, z1 - 2, 4) 
end 
end 
end 
addEventHandler("onVehicleExplode", getRootElement(), notifyAboutExplosion) 

Osea toma esa data la de "spawn" para obtener el x,y,z que anterior mente se le seteo para crearla... entonces con lo de la db... nose porque arroja nil si si tiene la data.. .ya que si funciona el respwn nose si me explico.

----ARREGLADO

Link to comment
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...