Jump to content

[Ajuda] Compreensão


Recommended Posts

Boa Noite, tenho 2 script totalmente iguais o que muda é a posição dos blinkers e a bindkey, mas tenho um problema cada script deles tem 2 blinkers ambos no mesmo carro, e quando activo os dois scripts eles funcionam juntamente, ou seja anula todo o efeito pretendido. Pretendo que um script faça blinkers de piscas para a direita e o outro script para a esquerda, mas quando activo os dois scripts ele funcionam directamente juntos ou seja ficam 4 piscas ligados :/ Têm teclas diferentes não entendo porque funcionam juntos :/

Script 1 - Esquerda:

-- Emergency Lights resource by vovo4ka 
-- please, do not remove copyright
 
local strobo_interval = 10      -- strobo light freq. 10 = 0.5 sec
local is_strobo_enabled = false -- enable/disable stroboscopic lights mode
-- lamps
local flash_interval = 0.5      -- flash freq
-- led blink mode
local blink_interval = 10       -- blink interval
local blink_duration = 1        -- 1..blink_interval
 
-- Node: If vehicleID what you want to change is not present here, you may add it manually
-- There are custom lights count and position for each vehicle is available
 
-- What is phase offset. I'm newbie in english and its hard to explain You can read more about on [url=http://en.wikipedia.org/wiki/Phase_(waves]http://en.wikipedia.org/wiki/Phase_(waves[/url])
-- All you need to know about phase_offset: 0 and 10 values will have opposite intensity (i.e. light with 0 will be on and 10 will be off and vice versa)
--
-- dont read below, if youre humanities
--
-- For each light source there are light intensity calculation performed at each time.
-- There are two lights type are available for vehicles:
-- 1.
-- Usually, light reflector is rotating and light intensity is proportional to visible part of lamp.
-- So, light intensity is approximated by simple model:
-- intensity(t, i) = 256*sin (t+PhaseOffset_i)
-- where t - is model time, i - light source id
-- 2.
-- For LED blinking there is simpler model:
-- blink 2 times at time moment 0
--
-- So, PhaseOffset - is time difference between triggering lights
 
local car_lights_table = {
-- vehicle ID, ["mode"]="led" or "lamp" , [i] = { light offset, light color, light size, phase offset (from [0;10]) }
-- FBI - RANCHER
[490] = {["mode"]="lamp",
[1]={["pos"]={-0.9, -2.6, 0}, ["color"]={255,128,0}, ["size"]=0.35, ["phase"]=6.0}, -- Pisca traseiro PENDURA
[2]={["pos"]={-0.9, -2.6, 0}, ["color"]={255,128,0}, ["size"]=0.35, ["phase"]=6.0}, -- Pisca traseiro PENDURA
[3]={["pos"]={-0.9, 2.4, -0.1}, ["color"]={255,128,0}, ["size"]=0.35, ["phase"]=6.0}, -- pisca frontal PENDURA
[4]={["pos"]={-0.9, 2.4, -0.1}, ["color"]={255,128,0}, ["size"]=0.35, ["phase"]=6.0}, -- pisca frontal PENDURA
},
 
-- since 0.8 there are no default lights position, because only emergency and pre-defined vehicles can use lights
--["default"] = {["mode"]="lamp", [1]={["pos"]={0.5, 0, 0.8}, ["color"]={255,0,0}, ["size"]=0.25, ["phase"]=0.0}, [2]={["pos"]={-0.5, 0, 0.8}, ["color"]={0,0,255}, ["size"]=0.25, ["phase"]=10.0}}
}
 
-- do not modify --------------------------------------------
local vehicles = {}
local timers = {}
 
local base_freq = 50    -- freq of timer for light change
 
-------------------------------------------------------------
function release_vehicle(vehicle)
    if (isElement(vehicle)) then
        if (is_strobo_enabled) then
            setVehicleOverrideLights ( vehicle, 0)
            setVehicleLightState ( vehicle, 0,  1 )
            setVehicleLightState ( vehicle, 1,  1 )
            setVehicleLightState ( vehicle, 2,  1 )
            setVehicleLightState ( vehicle, 3,  1 )
        end
    end
    if (vehicles[vehicle]~=nil) then   
        -- release the markers
        for key, value in pairs(vehicles[vehicle]["flist"]) do
            destroyElement (value["m"])
        end
       
        vehicles[vehicle] = nil
    end
    if (timers[vehicle]~=nil) then
        -- kill the strobo timer
        killTimer(timers[vehicle])
        timers[vehicle] = nil
       
        if (isElement(vehicle)) then
            if (getElementData( vehicle, "emerlights_source")==getPlayerName(getLocalPlayer())) then
                triggerEvent ( "onPlayerEmergencyLightStateChange", getRootElement(), 0 )
            end
        end
    end
end
 
function checkForAbility(vehicle)
    local veh_model = getElementModel ( vehicle )
    if (car_lights_table[veh_model]==nil)or(getElementData( vehicle, "emerlights_enabled" )=="false") then
        return false
    end
    return true
end
 
function strobo_state_update (vehicle)
    -- check for valid vehicle
    if (isElement(vehicle)) then
        if (vehicles[vehicle]==nil) then
            -- check for disallowing to use lights
            -- its enabled by default
            if (checkForAbility(vehicle)==false) then
                release_vehicle(vehicle)
                return
            end
            local veh_model = getElementModel ( vehicle )
           
            --if (car_lights_table[veh_model]==nil) then
            --veh_model = "default"
            --end
           
            local occupant = getVehicleOccupant( vehicle, 0)
            if (getElementType(occupant)=="player") then    -- peds also can use emerlights
                local src = getPlayerName(occupant)
                setElementData( vehicle, "emerlights_source", src, false)
                if (src==getPlayerName(getLocalPlayer())) then
                    triggerEvent ( "onPlayerEmergencyLightStateChange", getRootElement(), 1 )
                end
            end
            -- init state variable
           
            vehicles[vehicle] = {}
            vehicles[vehicle]["lstate"] = 0     -- strobo lights state
            vehicles[vehicle]["fstate"] = 0 -- flash light state
            vehicles[vehicle]["flist"] = {}     -- flash lights list (marker ids)
           
            -- create flash lights
 
           
            local mode = car_lights_table[veh_model]["mode"]
            if (mode==nil) then
                mode = "lamp"
            end
           
            local coeff = 0
            if (mode=="lamp") then
                coeff = 3.141592654/10.0
            else
                coeff = blink_interval/20.0
            end
           
            vehicles[vehicle]["fmode"] = mode
           
            for light_id, light_desc in pairs(car_lights_table[veh_model]) do
                if (light_id~="mode") then
                    vehicles[vehicle]["flist"][light_id] = {}
                    vehicles[vehicle]["flist"][light_id]["m"] = createMarker( 0.0001, 0.0001, 0.0001, "corona", light_desc["size"], light_desc["color"][1], light_desc["color"][2], light_desc["color"][3], 100)
                    vehicles[vehicle]["flist"][light_id]["p"] = light_desc["phase"]*coeff
                    attachElements ( vehicles[vehicle]["flist"][light_id]["m"], vehicle, light_desc["pos"][1], light_desc["pos"][2], light_desc["pos"][3] )
                end
            end
               
        end
       
        -- strobo light
        if (is_strobo_enabled) then
            setVehicleOverrideLights ( vehicle, 2)
            if (vehicles[vehicle]["lstate"]) then
                setVehicleLightState ( vehicle, 0,  1 )
                setVehicleLightState ( vehicle, 1,  0 )
                setVehicleLightState ( vehicle, 2,  0 )
                setVehicleLightState ( vehicle, 3,  1 ) 
            else
                setVehicleLightState ( vehicle, 0,  0 )
                setVehicleLightState ( vehicle, 1,  1 )
                setVehicleLightState ( vehicle, 2,  1 )
                setVehicleLightState ( vehicle, 3,  0 ) 
            end
            if (vehicles[vehicle]["lstate"]>=strobo_interval*2) then
                vehicles[vehicle]["lstate"] = 0
            else
                vehicles[vehicle]["lstate"] = vehicles[vehicle]["lstate"] + 1
            end
        end
        -- flash light
        if (vehicles[vehicle]["fmode"]=="lamp") then
        -- lamp mode
            local tmp_fstate = vehicles[vehicle]["fstate"]
            for key, value in pairs(vehicles[vehicle]["flist"]) do
                local R, G, B, A = getMarkerColor( value["m"] )
                setMarkerColor(value["m"], R, G, B, (math.sin(tmp_fstate+value["p"])+1.0)*128.0)
            end
           
            vehicles[vehicle]["fstate"] = vehicles[vehicle]["fstate"] + flash_interval
           
        else
        -- led mode
            local tmp_fstate = vehicles[vehicle]["fstate"]
 
            for key, value in pairs(vehicles[vehicle]["flist"]) do
                local R, G, B, A = getMarkerColor(value["m"])
                -- blinking mode
                local tmp_val = tmp_fstate+value["p"]
                if (tmp_val>blink_interval) then
                    tmp_val = tmp_val - blink_interval
                end
                if ((tmp_val>=0)and(tmp_val))or((tmp_val>=blink_duration+1)and(tmp_val2+1)) then
                    setMarkerColor(value["m"], R, G, B, 255)
                else
                    setMarkerColor(value["m"], R, G, B, 0)
                end
            end    
            vehicles[vehicle]["fstate"] = vehicles[vehicle]["fstate"] + 1
            if (vehicles[vehicle]["fstate"]>blink_interval) then
                vehicles[vehicle]["fstate"] = vehicles[vehicle]["fstate"] - blink_interval
            end
        end
    else
        -- if vehicle is no more exists
        release_vehicle(vehicle)
    end
end
 
-- not used anymore
function stroboLightOn()
    playerVehicle = getPedOccupiedVehicle ( getLocalPlayer()  )  -- get the player's vehicle
 
    --setElementData( playerVehicle, "emerlights_enabled", "true" ) -- debug
   
    if ( playerVehicle ) then
        -- if player is not a driver
        if (getLocalPlayer()~=getVehicleOccupant( playerVehicle )) then
            --outputChatBox("you're not a driver!")
            return
        end
       
        setStroboLightsOn(playerVehicle, nil)
    end
end
 
function isStroboLightsOn (vehicle_id)
    if (timers[vehicle_id]) then
        return 1
    else
        return 0
    end
end
 
function setStroboLightsOn(vehicle_id, value)
    if ( vehicle_id ) then
        if (value==nil) then
            if (isStroboLightsOn(vehicle_id)==1) then
                value = 0
            else
                value = 1
            end;
        end;
        if (value==0) then
            if (timers[vehicle_id]) then
                release_vehicle(vehicle_id)
                end
       
Link to comment
  • Moderators

Se você quer que alguém te ajude terá que explicar melhor, já que poucos devem usar esse recurso.

Será melhor ilustrar o seu problema por meio de imagem, ou explicar como funciona o script.

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...